PCB LITE blog

IC's Troubleshooting & Solutions

LAN91C111I-NU Not Detecting Network Cables_ Possible Causes and Fixes

LAN91C111I-NU Not Detecting Network Cables? Possible Causes and Fixes

Troubleshooting LAN91C111I-NU Not Detecting Network Cables: Possible Causes and Fixes

If your LAN91C111I-NU network interface card (NIC) is not detecting network cables, it can be frustrating, but there are several potential causes and steps you can take to fix the issue. Here's a step-by-step guide to help you troubleshoot and resolve the problem.

1. Check the Cable and Connection

The first step in troubleshooting any network issue is to check the physical connections:

Ensure the Cable is Working: Sometimes, the network cable might be damaged or faulty. Try using a different Ethernet cable that you know is working to rule out a broken cable as the issue. Inspect the Cable Connection: Make sure the cable is securely plugged into both the LAN91C111I-NU NIC and the network device (like a router, switch, or hub). A loose or partially inserted cable could cause detection problems.

2. Verify the NIC Status

The next step is to check the status of your network interface card:

Check the NIC LED Lights: Most network cards have LED indicators that show the connection status. If the LED is off or flashing irregularly, it may indicate a problem with the card or the cable. A solid green light usually means the NIC is working, while an amber or flashing light might indicate issues. Check the Device Manager (Windows users): Go to your device manager and see if the LAN91C111I-NU NIC is listed under “Network Adapters.” If there’s a yellow exclamation mark or error message, it may indicate a driver or hardware issue.

3. Test the Network Port

Sometimes the issue is not with the NIC itself but with the network port:

Try Another Port: If you’re using a switch or router, try plugging the network cable into a different port to see if the problem persists. Test the Port with Another Device: If possible, test the same network port with another device (like a laptop or a different NIC). If the other device also fails to connect, the problem might be with the network hardware.

4. Update or Reinstall Network Drivers

Outdated or corrupted Drivers can cause connectivity issues with the LAN91C111I-NU:

Update Drivers: Check the manufacturer’s website for the latest driver for your LAN91C111I-NU. Download and install the updated driver to see if it resolves the issue. Reinstall the Driver: If updating doesn’t work, uninstall the current driver from the device manager, restart your computer, and then reinstall the driver.

5. Disable and Enable the NIC

Sometimes, simply disabling and re-enabling the NIC can resolve minor connection issues:

Disable the NIC: Go to your network settings or device manager, find the LAN91C111I-NU NIC, right-click on it, and select "Disable." Re-enable the NIC: After disabling, wait a few seconds, then right-click again and select "Enable."

6. Check for Power Management Settings

Certain power management settings can cause the NIC to stop detecting network cables:

Disable Power Saving Features: In some cases, the NIC might be set to turn off to save power. Check the power settings in your computer’s BIOS/UEFI or operating system and disable any power-saving options related to the NIC.

7. Test the NIC on Another Computer

To rule out a hardware failure of the LAN91C111I-NU NIC:

Try the NIC in Another PC: If possible, try the LAN91C111I-NU on another computer. If it works, the issue is likely with your computer’s configuration. If it doesn’t work, the NIC might be faulty and needs to be replaced.

8. Check for Physical Damage

If none of the above steps work, inspect the LAN91C111I-NU NIC for any visible signs of physical damage:

Inspect the NIC for Visible Damage: Look for any burn marks, bent pins, or other physical damage to the network card. If the NIC is physically damaged, it may need to be replaced.

9. Reset the Router or Switch

If your router or switch is causing the issue, try resetting it:

Power Cycle the Network Device: Unplug the power cable from your router or switch, wait about 30 seconds, and then plug it back in. This can sometimes resolve connectivity issues related to the network hardware.

10. Try a Different Network Card

If all else fails, it may be worth considering that the LAN91C111I-NU NIC itself is faulty. In this case:

Replace the NIC: If you’ve ruled out all other possible issues and the NIC still won’t detect the network cable, you may need to replace it with a new one.

Summary

To fix the issue of your LAN91C111I-NU not detecting network cables, follow these steps:

Check the network cable and connection. Verify the NIC’s status and ensure drivers are up-to-date. Test the network port and try other devices. Disable and re-enable the NIC. Test the NIC on another computer to rule out hardware failure. Check for power management settings and reset your router/switch. Replace the NIC if necessary.

By following these troubleshooting steps, you should be able to diagnose and fix the issue with your LAN91C111I-NU network interface card.

Add comment:

◎Welcome to take comment to discuss this post.

Powered By Pcblite.com

Copyright Pcblite.com Rights Reserved.